VINALIFT Rolls Out Scrap Charging Crane 230/150 Tons for Pohang Steelworks (South Korea)

Lễ xuất xưởng Cầu trục nạp liệu 230/150 tấn - Sẵn sàng xuất khẩu Hàn Quốc

On November 11, 2026, at VINALIFT Factory No. 2 (Hai Phong City), Vietnam Steel Structure and Lifting Equipment Joint Stock Company (VINALIFT) held a roll-out ceremony for a 230/150-ton scrap charging crane to be exported to South Korea. Designed and manufactured by VINALIFT’s engineers and workers under an order from POSCO E&C, the equipment will charge scrap into the No. 1 Converter at the No. 3 Steelmaking Plant of POSCO Group’s Pohang Steelworks. This milestone affirms the capability of Vietnam’s mechanical engineering sector in manufacturing heavy-duty lifting equipment for the steelmaking industry.

Korean Partners and Industry Associations Attend the Ceremony

Partners and Industry Associations Attend the Ceremony
Partners and Industry Associations Attend the Ceremony

Attending the ceremony was Mr. Tran Van Tuan, Chairman of the Board of Directors of VINALIFT. Representing the client were Mr. Moo Youl Kim, along with Mr. Choi Woon Geun and Mr. Kwon Ohjun from POSCO E&C. The quality supervision unit KOTEC was represented by Mr. Won Seok Kwak and Mr. Jung Do Hyun.

On the Vietnamese side, the ceremony was attended by:

  • Vietnam Association of Mechanical Industry (VAMI): Mr. Le Phung Thang, Vice President; Mr. Hoang Manh Trung, Head of the Inspection Committee

  • Vietnam Steel Association (VSA): Ms. Trang Thi Thu Ha, Executive Committee Member and Chief of Office

  • Pha Rung Shipbuilding Company: Mr. Tran Quoc Chien, Chairman; Mr. Vu Huu Chien, General Director

  • Military Commercial Joint Stock Bank (MB): Mr. Le Thanh Nam, Deputy Division Director

  • Representatives from steel manufacturing enterprises and strategic partners of VINALIFT.

Following the ceremony, delegates toured the factory to observe VINALIFT’s manufacturing processes and machinery systems.

Specialized Equipment for Steelmaking Converters

Scrap charging crane 230/150 tons
Scrap charging crane 230/150 tons

At Pohang Steelworks, the overhead crane will serve the top-and-bottom-blown No. 1 Converter of the No. 3 Steelmaking Plant, tasked with lifting scrap buckets and charging them into the furnace. Operating continuously in a high-temperature and dusty environment, the equipment requires a robust structure, highly reliable hoisting mechanisms, and a multi-layered safety system.

VINALIFT undertook the comprehensive package: design, technical calculation, fabrication, Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT), through to handover and installation at the client’s plant.

The overhead crane features a span of 21.7 meters and a total weight of approximately 435 tons, designed to the M7 duty class suitable for high-intensity operations. The main hook was load-tested at 253 tons, equivalent to 110% of the rated load. All hoisting and traveling mechanisms utilize vector Variable Frequency Drives (VFDs) with redundancy; the main hoisting mechanism is equipped with four electro-hydraulic disc brakes.

(3D) Scrap charging crane 230/150T
(3D) Scrap charging crane 230/150T
Item Specifications
Application Scrap charging for No. 1 Converter, No. 3 Steelmaking Plant, Pohang Steelworks (POSCO)
Ordered by (Client) POSCO E&C (POSCO Eco & Challenge)
Crane Duty Class M8
Lifting Capacity (Main / Aux Hook) 230 tons / 150 tons
Test Load (Main / Aux Hook) 253 tons / 165 tons (110% of rated load)
Span 21.7 m
Speeds (Hoisting / Trolley / Crane Travel) 10 / 40 / 80 m/min
Hoist Motors Main hook: 2 × 320 kW, Aux hook: 1 × 320 kW
Hoist Brakes Main hook: 4 electro-hydraulic disc brakes, Aux hook: 2 disc brakes
Control System Vector VFDs with redundancy for all mechanisms
Power Supply 3,300 V, 60 Hz, 3-phase
Operator Cabin Fixed cabin
Total Weight Approx. 435 tons (Structure: 174T, Main trolley: 145T, Aux trolley: 55T, Travel drive: 48T, Electrical equipment: 13T)
VINALIFT’s Scope of Work Design, manufacturing, site delivery, installation supervision, operational training

A Milestone for Domestic Mechanical Manufacturing

Scrap charging crane 230/150 tons at VINALIFT 2
Scrap charging crane 230/150 tons at VINALIFT 2

Heavy lifting equipment for the steel, energy, and seaport sectors demands stringent requirements in design, materials, and quality control. POSCO E&C’s order for a 230/150-ton overhead crane from a Vietnamese enterprise is a clear testament to the domestic mechanical sector’s capability in meeting the rigorous technical standards of international projects.

The presence of VAMI and VSA at the ceremony demonstrates the industry associations’ interest in the domestic mechanical sector’s capacity to supply equipment for the steel industry. When local enterprises master the entire process from design to manufacturing, plants gain more options regarding supply sources, delivery schedules, and maintenance services throughout the equipment’s life cycle.

This capability has been accumulated by VINALIFT through numerous projects: lifting equipment for military ports, thermal power plants, and shipyards, as well as overhead and gantry cranes exported to over 20 countries, including demanding markets such as the US, Canada, and Europe.

Remarks at the Ceremony

Speaking at the event, Mr. Tran Van Tuan, Chairman of VINALIFT’s Board of Directors, emphasized:
“For VINALIFT, every rolled-out product carries not just the equipment itself, but also the prestige, responsibility, and aspirations of Vietnam’s mechanical engineering workforce.”

Mr. Tran Van Tuan, Chairman of the Board of Directors of VINALIFT, speaks at the ceremony.
Mr. Tran Van Tuan, Chairman of the Board of Directors of VINALIFT, speaks at the ceremony.

Mr. Tuan extended special thanks to the company’s staff, engineers, and workers: “Behind every structure, every weld, and every movement of this machine lies the knowledge, hands-on labor, sweat, effort, and sense of responsibility of our team.”

In the long term, VINALIFT identifies lifting equipment for the steel industry as a strategic sector. The company aims to provide a portfolio of solutions spanning the entire steelmaking process, from raw material handling, scrap charging, and molten steel transport to steel rolling, billet storage, and finished product warehouses. “The Vietnamese market is the foundation for us to develop our capabilities. Steel plants worldwide are the markets that VINALIFT is determined to reach,” Mr. Tuan affirmed.

About VINALIFT

The ceremony was a great success.
The ceremony was a great success.

Vietnam Steel Structure and Lifting Equipment Joint Stock Company (VINALIFT) was established in 2006. After 20 years of development, VINALIFT is one of the leading manufacturers of non-standard lifting equipment in Vietnam with an established footprint in the region.

The company masters the design, manufacture, installation, and maintenance of overhead cranes, gantry cranes, pedestal cranes, quayside cranes, container gantry cranes, electric winches, and non-standard steel structures.

VINALIFT’s products are present at seaports, thermal power plants, shipyards, and electronics factories, and have been exported to over 20 countries and territories, including the US, Canada, Italy, Saudi Arabia, India, and the Philippines.

Website: vinalift.vn | vinalift.global

Đọc thêm: VINALIFT Accompanies VPA Annual Conference 2026 – Towards Green and Smart Seaports