Portal Crane Project 25 Tons, ARM’S Reach 36M BaSon Shipbuilding – Company

In the hot summer days, with the determination of employees VINALIFT Co. has designed, manufactured and installed successfully, right progress the 25-ton hydraulic portal crane arm’s reach 36 meters for Ba Son Trust- Company – MOD. Portal crane has been put into operation immediately after get licensed by Army testing centre on 07.05.2012.

Tin-tuc-ba-son-3

PORTAL CRANE PROJECT 25 TONS, ARM’S REACH 36M BASON SHIPBUILDING – COMPANY

In the hot summer days, with the determination of employees VINALIFT Co. has designed, manufactured and installed successfully, right progress the 25-ton hydraulic portal crane arm’s reach 36 meters for Ba Son Trust- Company – MOD. Portal crane has been put into operation immediately after get licensed by Army testing centre on 07.05.2012.

tin-tuc-ba-son-1

TECHNICAL SPECIFICATION

+ Capacity: 25 tons radius from 4 to 36 meters
+ Span: 10.5m
+ Lifting speed: 0-22m/min
+ Lifting speed with 95 seconds (from maximum to minimum radius)
+ Rotary speed: 0-0.75m/min
+ Travelling speed: 0-35m/min
+ Working mode: Q2/U5/A5 – TCVN4244-2005

Technical Design: With a full of experienced engineers’ design team. In addition to ensuring the technical and safety requirements in accordance with standard lifting equipment, the calculation is designed to focus on: The stability of the crane, hydraulic system, stable counterpoise due to eccentric … On that basis, VINALIFT Co.  has given technical options help bring stability operations for crane with the superior features such as:
– Lifting capacity unabated in full radius turns.
– Light weight crane, low crane focus help to improve the stability, reduce fixed costs harbor, reduced wheel pressure on the wharf.
– Tidy and clearly structural framework to ensure the vehicles can move underneath of crane is easy and safe.
– Increase hydraulic cylinder that was plated in chromium-nickel therefore, should not need to maintenance the structure. Not need rest case equipment when not working.
– Weight is maintained at all angles thanks to the dual effect of hydraulic cylinder.
– Low operating and maintenance costs.

tin-tuc-ba-son-2

Manufacturing technology: VINALIFT Co. has applied 3D technology design to production. All details are designed, assembled on 3D programmed and cut on a CNC machine. Ensuring there is no detect in the production process and to achieve the requirement of saving supplies used in production

In the process of outsourcing the structure, VINALIFT has used prestressed method before combination to reduce warping during manufacturing; welding links are checked by X-ray technology or supersonic to ensure that all welded are fine to meet the technical requirement and there is no disabilities error on moving stage. Complete equipment assembly is completed at the factory to check then unbind and moved to the installation site. This helps the crane is strictly controlled at all stages of manufacturing according to standards TCVN4244-2005; DIN, ISO, IEC, EN…..

Power and control Systems: All control systems are programmed by electrical engineers VINALIFT Co. on the basis of the PLC system. Safety equipment such as measuring the angle, measured wind speed, humidity information is transferred to the central processor for control ensures absolute safety equipment in the process of exploitation.
The research, design, manufacture, installation successful 25-ton hydraulic crane has defined a  further ability, capability to design, manufacturing technologies, installation of lifting equipment of VINALIFT Co. , help reduce the cost of imports, savings investment capital and to meet the need of enhancing the localization rate of products in Vietnam mechanics industry.

Tin-tuc-ba-son-3

  • Introduction VINALIFT
  • +84 24 3641 9469 - ext: 102,103

    Mr Toan: +84 944 883 359

  • Technical Consult

    Mr Bay: +84 983 266 864

    Mr Diep: +84 904 856 856

  • Service

    Hotline: +84 24 3641 9469 - ext: 107

    Mr Tien: +84 912 288 077